Durable industrial grade thermostat with indicator light provides accurate repeatability and controlled temperature.
(15 lbs.) 110V Item #2800067

Instructions Click Here

Click Here to Order Replacement Mag 20 Parts

Designed for the ladle-caster only, the Magdipper has the full 20 lb. capacity, the proven heating system, body construction and wide, tip-resistant base of our Mag 20. Even larger casting ladles have easy access into the 4 3/8" diameter pot.
(10 lbs.) 110V Item #2800061

Instructions Click Here

Click Here to Order Replacement Magdipper Parts

Mini-Mag Furnace

Lyman’s Mini-Mag is an economical but durable casting pot for the expert or beginner. With a newly expanded “10 lb. capacity” this handy electric furnace heats up fast and can quickly turn out plenty of top quality bullets. 
Mini-Mag Furnace only
(4 lbs., 6 oz.)
110V Item #2800200

Instructions Click Here

Click Here to Order Replacement Mini Mag Parts

Although the accepted pioneer in bullet casting, Lyman continues to improve. The new 4500 Lube Sizer is a delight to use. It features:

     Solid one piece bottom casting - ideal for use with hard bullet lubricants.
     Available with (as shown) or without built in heating element and available in 110 volt. 
     A new longer ball knob handle for more leverage for sizing and lubricating the largest bullets.
     Complete with Gas Check Seater and complimentary lube.
     Easy adjustments for bullet seating depth and lube flow.

Purchase the Lyman top punch and sizing die of your choice. Changing bullet diameter requires an easy change of sizing dies.

(7¾ lbs.) 4500 Lube/Sizer 

Instructions Click Here

Click Here to Order Replacement 4500 Parts

Click Here to Order Replacement Older 450 Parts

4500 Lube/Sizer Heating Element

For those who own a 4500 Lube/Sizer without a heating element, this item may be purchased separately. Available in 110 volt only. (not for use with the model 450 or any other models)

This ingenious, patented device allows consistent, square seating of gas checks. Works on all Lyman #450 and 4500 Sizer/Lubricators and RCBS Lube-A-Matic.
(4 oz.) Item #2745881

The new Lyman Lubricator Heater was designed for today’s new high temperature lubes. It heats the Lube/Sizer to the right temperature allowing smooth, effortless bullet lubrication. The mounting plate is drilled and tapped for Lyman 450, RCBS, Saeco and Star Lube/Sizers. Plugs into standard 110 volt outlet (comes complete with mounting hardware).
110V Item #2745885
220V  Item #2745888

For use with bottom pour furnaces, this accessory cuts casting time in half and provides precise set-screw adjustments for all set-ups. Holds and aligns moulds and takes the weight off operators hands. Compatible with all Lyman moulds and similar designs. Included with Lyman's Mag 20 furnace.
(1 lb.) Item #2837515

In addition to the Mini-Mag and the 4500 Sizer/Lubricator, the kit features a long handled casting dipper, a handy ingot mould and the widely acclaimed “Bible of bullet casting”; Lyman Cast Bullet Handbook. All this for less than the price of most casting furnaces.
Master Casting Kit (8 lbs., 4 oz.) Item #2712000

Useful when melting down scrap lead, emptying your furnace, or when blending alloys. Each mould forms four, easy-to-use ingots that stack easily and will weigh approximately 1 lb. Sides of mould have 30° draft for easy ejection of lead ingots.
(1 lb.) Item #2837794

Our dipper with cast iron head is shaped for easy, accurate pouring and prevents air pockets in the finished bullet. The long stem dipper can also be used for stirring molten lead alloys. Wooden handle stays cool in use.
(6 oz.) Item #2867790

Lyman's lead pot allows the bullet caster to use any source of heat for melting his lead alloy. Nominal pot capacity is ten pounds of alloy. Flat bottom prevents tipping.
(1 lb.) Item #2867791

This stainless steel thermometer will measure a temperature range from 200°F to 1000°F and has a six inch stem for use with even the deepest furnaces.
(4 oz.) Item #2867793

New Super Moly is an all purpose, high temperature bullet lubricant. With Molybdenum Disulfide added for increased velocity, it coats the barrel with a fine film which improves accuracy and makes leading nonexistent. It flows through lube sizers without heat and won’t melt at 130°. It’s the best lube you can use for any shooting.
Item #2857272

Match proven at the 1996 Black Powder Silhouette Championship at Raton, New Mexico, Black Powder Gold was formulated specifically for black powder shooting. It’s high melting temperature makes it ideal for long range match shooting. It keeps fouling soft for continuous shooting and flows through lube sizers for effortless bullet lubing. It can be applied by hand to muzzleloading bullets. You cannot buy a better black powder lubricant than Black Powder Gold!             Item #2857266

Lyman’s Orange Magic has gained a reputation as one of the premier lubes among pistol shooters. It is guaranteed to provide higher velocities with cast bullets without leading. It’s low smoke output makes it perfect for rapid fire pistol shooting. Will not melt out of loaded ammunition at high temperatures. (Use with the Lyman Lube Heater.)
Item #2857286

Our standard offering of pistol moulds covers popular bullet designs, in double cavity style. Four cavity blocks for selected designs are also available. Simply click the "For available Pistol Moulds click here" line below for availability of all pistol moulds.

Double and single cavity mould blocks, less handles (12 oz.)

Four-cavity mould block, less handles (2 lbs., 3 oz.)

For available Pistol Moulds click here.

Double Cavity Pistol Moulds, less handles

Four Cavity Pistol Moulds, less handles

Hollow Point Pistol Moulds, less handles

 

Cast Bullet Guide

 

Rifle Moulds

Lyman rifle moulds are the standard by which all other rifle moulds are judged, regardless of price. Our standard offering of proven, popular designs is the widest available. The designs shown below picture gas checks where appropriate. All Lyman rifle moulds are available in double cavity only, except those moulds where the size of the bullet necessitates a single cavity (indicated below by a *). All rifle moulds shown below require double cavity handles, regardless of the number of cavities indicated. Hollow point designs are noted as "HP".

(13 oz.) mould, less handles

For available Rifle Moulds click here.

Cast Bullet Guide

Mould Handles

Double-cavity handles (for all current two-cavity and single cavity moulds) (12 oz.) Item #2735793

Four-cavity handles (1 lb.) Item #2735794

12 GA Sabot Item #2654112
20 GA Sabot  Item #2654120 (Data included with mould)

Cast Bullet Guide

Shotgun Slug Moulds

Available in 12 gauge 475 grain, 2654012 or 20 gauge, 350 grain, 2654020, these moulds cast perfect hollowbase slugs which do not require rifling. Slug moulds are single cavity only and cut into the larger double cavity block. They require double cavity handles. (14oz.)

Cast Bullet Guide

12 Gauge Roll Crimp Head w/Drill Press Adapter
Used to apply roll crimp to 12 gauge Foster-type slugs. Drill Press with adjustable stop required. 
Item number #8898902

[Add to Cart]  [View Cart]

Plains Bullets - offers the traditional muzzleloader a tapered bullet design for easy loading. Large deep lube grooves hold enough lube to keep fouling soft and ensure accuracy without leading. (14 oz.)

Cast Bullet Guide

Minié and Maxi Ball - designs are exactly reproduced from originals used over 100 years ago. The best bullets selected from American and British designs from 45 to 69 caliber. (14 oz.)

Cast Bullet Guide

Round Ball Moulds - throw perfect, ball after ball, with a minimum sprue to ensure the kind of accuracy that target shooters have come to expect from Lyman precision moulds. (14 oz.)

Double Cavity

Single Cavity

Cast Bullet Guide

Round Ball Suitability Chart

Ball Diameter	§Single Cavity Part#	2 Cavity Part #	Common Usage
*375		2665375 [ Add to Cart]	36 Calliber
*440		2665440 [ Add to Cart]	45 Caliber
445		2665445 [ Add to Cart]	45 Caliber
451(P)		2665451 [ Add to Cart]	44 Caliber
454(P)		2665454 [ Add to Cart]	44 Caliber
457(P)		2665457 [ Add to Cart]	45 Ruger
*490		2665490 [ Add to Cart]	50 Caliber
495		2665495 [ Add to Cart]	50 Caliber
500	2645500 [ Add to Cart]
*530	2645530 [ Add to Cart]		54 Caliber
535	2645535 [ Add to Cart]		54 Caliber
*570	2645570 [ Add to Cart]		58 Caliber
575	2645575 [ Add to Cart]
600	2645600 [ Add to Cart]
610	2645610 [ Add to Cart]
662	2645662 [ Add to Cart]		12 ga.
690	2645690 [ Add to Cart]		12 ga.
*715	2645715 [ Add to Cart]		75 Caliber
735	2645735 [ Add to Cart]
* Recommended size depending on bore diameter. (P) Recommended for percussion revolvers § NOTE:All single cavity round ball moulds take large cavity handles

Improved Sizing Dies

Lyman improved sizing dies now have 90° hole spacing. It’s now easy to lubricate bullets even with today's hard lubricants. Lyman sizing dies also feature a tapered mouth and hardened interior insuring alignment for perfect cylindrical shape. Interior dimensions correspond to suggested diameters for all popular rifle and pistol calibers. Refer to the chart below for proper size.

Lyman Top Punches are precisely machined to fit bullet nose shape exactly. This eliminates nose deformation. Refer to Lyman’s bullet mould listing for suggested top punch number.

Top Punches

H & I Sizing Dies

Lyman Sizing Die Diameter Chart

Dia.	Part No.	Dia.	Part No.	Dia.	Part No.
224	2766462	321	2766485	409	2766550
225	2766463	323	2766486	410	2766505
243	2766542	325	2766487	413	2766506
244	2766466	338	2766488	427	2766508
251	2766460	354	2766534	428	2766537
257	2766466	355	2766490	429	2766509
258	2766467	356	2766491	430	2766510
264	2766543	357	2766492	431	2766511
266	2766470	358	2766493	439	2766541
277	2766551	359	2766494	446	2766513
278	2766471	360	2766495	450	2766514
284	2766552	363	2766559	451	2766515
285	2766473	375	2766497	452	2766516
308	2766476	377	2766527	454	2766517
309	2766477	378	2766524	457	2766519
310	2766478	379	2766498	458	2766535
311	2766479	400	2766501	459	2766530
312	2766528	401	2766502	501	2766525
313	2766480	406	2766504	509	2766520
314	2766553	408	2766548	512	2766521

Suggested And Alternative Sizing Die Diameters

PISTOL Caliber	Dia. (inches)
22 Jet, 221 Fireball	224*, 225
25 ACP	251*
25 Cal.	257*, 258
30 Luger, 30 Herrett, 30 Mauser	310*
32 ACP, 32/20, 32 S&W, 32 H&R Magnum	311,312,313,*,314
9mm Luger**, 38, 38 Super Auto, 380 Auto	354,355*,356
38 S&W, 38 Spl., 357 Mag**, 357 Max.,	357,358*, 359,360
9mm Makarov	363
38/40, 10mm Auto, 40 S&W	400*, 401
41 S&W Mag, 41 Action Express	410*
44 S&W Spl, 44 Mag**, 44 Russian	429*, 430, 431
45 ACP, 45 Auto Rim, 45 Colt (post WWII), 45 Sch, 45 Win Mag	450,451*, 452
45 Colt (pre-WWII) & 455 Webley	454*
500 S&W	501
* * Wide variations in diameter. Suggest you slug barrel *Indicates suggested useful diameter, which may vary from gun to gun

 

RIFLE Caliber	Dia. (inches)
22 cal (except 22 Hi-power)	224, 225*
243, 244, 6mm	243, 244*
25 cals.	257, 258*
264 Win. Mag, 6.5mm	264*, 266
270 Win**	277, 278*
7mm, 280 Rem, 284 Win	284, 285*
30 cals.	308, 309*, 310
7.62mm Russian**	310
32/20 Win	311, 312*
7.65 Mauser**	311
303 British**, 7.7 Jap**	313, 314*
32 Win Spec, 32 SL, 32 Rem	321
8mm Mauser(S bore)	323, 325*
338 Win, 33 Win	338*
9mm x 56, 9mm x 57	354, 355*, 356
35 cal	357, 358*, 359
375 H&H Mag, 375 Win	375, 377*, 378
38/55**	379
38/40	400, 401*
40 cal rifle	406, 410
44/40	427, 428*
44 Spl, 44 magnum	429, 430*
444 Marlin	430, 431*
43 Spanish	439
45/70, 458 Win	457, 458*, 459
50 cal rifle	509, 512*
* * Wide variations in diameter. Suggest you slug barrel *Indicates suggested useful diameter, which may vary from gun to gun

 

Gas Checks

These gilding metal cups fit the cast bullet base and protect it from hot powder gases. Easily seated during bullet sizing, the gas checks also permit higher velocities.

.22 through .35 caliber (per 1000) (1½ lbs.)
.375 through .45 caliber (per 1000) (1½ lbs.)

Cal.	Item Number
.22	2827261
.243 (6mm)	2827262
.25	2827263
.264 (6.5mm)	2827264
.284 (7mm)	2827266
.30	2827267

 

Cal.	Item Number
.32	2827268
.35 (.38 Spl. & .357)	2827270
.375	2827271
.44	2827272
.45	2827273

Lyman Mould Rebuild Kit

With proper care, a Lyman mould will last for generations. Rebuild kits provide replacement of those moving parts which may tend to wear after long use. Includes sprue cutter, washer, all screws for block and handle.

Large single cavity kit (2 oz.)  Item #2680100
Double cavity kit (2 oz.)  Item #2680102
Four cavity kit (6 oz.) Item #2680104

Parts List Click Here

Click Below link to order Rebuild Kits & Mould Parts

Large Single Cavity Mould Replacement Parts & Rebuild Kits

Double Cavity Mould Replacement Parts & Rebuild Kits

Four Cavity Mould Replacement Parts & Rebuild Kits

Mould Box

Spare mould box is made of tough plastic with a snap-lock cover. Impervious to moisture, bore cleaner or oil. Includes blank label. Fits single and double cavity moulds only.

(3 oz.) Item #2735790
Ten Pack (1 3/4 lbs.)  Item #2735789